* * * * Quarantine Sale - ALL PRODUCTS - 60-70% OFF * * * *

Multi Band Gate Manual

Quickstart TL;DR

  1. Decide what source you want to listen to as the detector, whether the input audio or the sidechain input
  2. Check the "Key Listen" switch, set the filters to the area you really want the gate to focus on and then uncheck "Key Listen"
  3. In the Spectrum Window, set the crossover points to divide the sound into three frequency sections of low, mid and high
  4. Set the threshold control in the Detector Window, so that the threshold line is below the peaks you are interested in, but above the background bleed
  5. Set the individual envelopes in the Envelopes Window to make each frequency section as long or as short as you want.


The User Interface

Spectrum Window

Detector Window

Envelopes Window

Signal Flow